One of the best and probably most popular ways to give your home on the inside a fresh new look as well as raise the value of your home is to paint the inside of your home. It’s also a way to change the mood of a room However, in order for you to get the job done right, Tex Painting Austin believes it is important that you know that there’s a lot of things that should be done before you even start to doing the painting.
We want to make sure that you are a success and happy with the outcome of your work, we’ve put together a guideline that should help you get the job done and done properly.
Protect Your Furniture
If you want to avoid getting any paint on your furniture you really should cover all of your furniture with plastic material. You will also want to move the furniture away from the walls so that you’ll have plenty of room to paint without bumping into your furniture in the process. The best thing you can do though is remove all the furniture from the room whenever possible.
Clear the Walls Off
The next thing you’ll want to do is to take everything off your walls. This is going to make it a lot easier for you to paint the entire wall without any obstacles in the way. If you have items that are valuable you should wrap them in bubble wrap and put them in bins or boxes to keep them protected while you’re painting. You will also want to remove all of the picture hangers and nails and then fill in the holes with some Spackle before you start painting.
Clean Your Walls Off
It’s very important that you make sure that the walls are cleaned off in order for your paint to stick well and to look professional when you’re done. You can fist take your vacuum and take any visible lose dirt off and then follow it up with a cloth that’s been put in a solution of warm water and a mild detergent. This will help make it easier off any dark smudges, oils, and other substances that might be on the wall that will interfere with your paint job.
If you come across really tough smudges or marks by using trisodium phosphate. This solution will help you get rid of soot stains and kitchen grease. If you have any mildew and mildew stains, mix the trisodium phosphate with a little bit of bleach to remove this. Make sure that you open up windows if you’re trying to get rid of any mildew.
Remove Outlet and Switch Plates
Along with everything else on your walls, make sure that you remove all of the outlet and switch plates. You don’t want to paint over these because when there’s a need to remove one there’s a possibility you’ll end up damaging your paint job because it could tear off some of your paint.
Protect Hardwood Floors and Carpets
The last thing you want is to paint spills or splatter on your hardwood floors or carpets, so it’s always a good idea to make sure that these areas are protected. The best thing you can use are painters canvas drop cloths, because these will lay flat on the floor and it’s hard for the paint to soak through them.
Cover Your Trim
If you are not painting your trim in your home the same color it’s a good idea for you to use painters tape to cover up these areas if you don’t want to get paint smears on these areas.
Set Up a Staging Area
In the middle of the room that you are planning on painting you really should consider setting up what’s known as a staging area. This is an area where you can pour your paint, keep your store open paint cans and clean your brushes as well as your rollers. This will help to cut down on spills and accidents. This will also keep you from misplacing important items if you have a specific place for keeping them.
By preparing your home in this fashion you will be able to work faster, neater, and you’ll end up with results that you will be very proud of. It also will help you save money because there will be no reason to have to do any of the painting over again. It will give you a room you can enjoy immensely and it will also increase the value of your home.